HP CH955A#B19
DESIGNJET L25500 42 PLOT 42 INCH ENET IN
| Identificador: | 54261 |
|---|---|
| Marca: | HP |
| P/N: | CH955A#B19 |
| EAN: | 884962402757 |
| Disponibilidad: | |
| Stock: | No Disponible |
HP Designjet L25500 42-in Printer
DESIGNJET L25500 42 PLOT 42 INCH ENET IN
Overview
Increase business opportunities with a printer that delivers unrivaled versatility with a wide range of outdoor and indoor applications. Experience easy, reliable HP Designjet printing and attract the attention of environmentally-conscious customers.
Features
Meet many needs with one device, offering unrivaled versatility for outdoor/indoor applications1.
⁍ Produce outdoor signage such as billboards, bus shelters and vehicle wraps, with durability comparable to eco-solvent inks2.
Experience easy, unattended, low maintenance printing with proven HP Thermal Inkjet Technology.
⁍ Enjoy easy printing with proven HP Thermal Inkjet Technology, water-based HP Latex Inks and Original HP printheads which enable automatic maintenance and unattended printing.
Print with the environment in mind and create an improved working environment for your employees.
⁍ Water-based HP Latex Inks do not require hazard warning labels, are non-flammable, non-combustible3 and no special ventilation is required4.
1 The HP Designjet L25500 Printer produces an extremely broad range of both outdoor and indoor applications from a single device, which surpasses the number of different applications that traditional eco-solvent printers or water-based printers can produce.
2 HP image permanence and scratch, smudge, and water resistance estimates by HP Image Permanence Lab. Outdoor display permanence tested according to SAE J2527 using HP Latex and eco-solvent ink on a range of media, including HP media; in a vertical display orientation in simulated nominal outdoor display conditions for select high and low climates, including exposure to direct sunlight and water; performance may vary as environmental conditions change. Scratch, smudge, and water resistance tested using HP Latex and eco-solvent inks on a wide range of media, including HP media; water resistance is comparable when printed on water-resistant substrates. Laminated display permanence using GBC clear gloss 1.7 mil hot laminate. Results may vary based on specific media performance and scratch testing methodology. For more information, see www.hp.com/go/supplies/printpermanence
3 HP water-based Latex Inks are not classified as flammable or combustible liquids under the USDOT or international transportation regulations. These materials have been tested per the Pensky-Martins Closed Cup method and the flash point is greater than 110 deg C.
4 Special ventilation is not required to meet US OSHA requirements on occupational exposure to VOCs from HP Latex Inks. Special ventilation equipment installation is at the discretion of the customer—no specific HP recommendation is intended. Typically no air discharge permitting required with HP Latex Inks. Customers should consult countryand local requirements and regulations.
| Warranty: One-year limited hardware warranty. Warranty and support options vary by product, country and local legal requirements. |
| Productos relacionados | Ver |
|---|
| Referencia | HP CH955A#B19 |
|---|---|
| 印刷颜色 | Cyan, magenta, yellow, black, light cyan, light magenta |
| 媒体类项支持 | Banners, vinyls, films, fabrics, papers, mesh with liner |
| 最大纸张宽度 | 1067 mm |
| 纸张厚度（公制） | > 0.02 in > 0.5 mm |
| 油墨数量 | 6 (1 each cyan, magenta, yellow, black, light cyan, light magenta) |
| 打印技术 | Inkjet |
| 打印墨盒卷（公制） | 775 ml |
| 打印头 | 6 (2 x yellow/black, 2 x cyan/light cyan, 2 x light magenta/magenta) |
| 最大滚轴长度 | No physical limit (determined by RIP software or media roll length); recommended up to 30 m No physical limit (determined by RIP software or media roll length); recommended up to 100 ft |
| 接口 | Gigabit Ethernet (1000Base-T) |
| 尺寸 | 1067 mm |
| 包装尺寸(宽度 × 深度 × 高度) | 223 x 81 x 118.4 cm (87.8 x 31.9 x 46.6 ") |
| 打印速度 | 21.2 m²/h (4-pass bidirectional), 13.4 m²/h (4-pass unidirectional), 14.3 m²/h (6-pass bidirectional), 9 m²/h (6-pass unidirectional), 8.9 m²/h (8-pass bidirectional), 6.9 m²/h (8-pass unidirectional), 7.7 m²/h (10-pass bidirectional), 5.5 m²/h (10-pass unidirectional), 6.4 m²/h (12-pass bidirectional), 4.5 m²/h (12-pass unidirectional), 5.5 m²/h (16-pass bidirectional), 3.4 m²/h (16-pass unidirectional), 3 m²/h (18-pass unidirectional) |
| 尺寸 | 198.1 x 69.8 x 137.2 106.7 cm (78 x 27.5 x 54 42 ") |
| 网络准备 | ✓ |
| 尺寸 宽度 × 深度 × 高度 | 1985 x 690 x 1370 mm |
| 重量 | 161 kg |
| 打印质量（彩色，最高质量） | < 1200 x 1200 DPI |
| 落墨 | 12 pl |
| 打印质量（黑色，最高质量） | 1200x1200 DPI |
| 最高打印长度 | No physical limit (determined by RIP software or media length); recommended > 30 m |
| 定制纸张尺寸 | 58 to 106.7 cm rolls |
| 纸张处理 | Roll feed, take-up reel, automatic cutter for vinyl, paper-based media, backlit polyester film and thin banners |
| 纸张处理标准/输入 | Roll feed |
| 纸张处理标准/输出 | Take-up reel |
| 打印机喷嘴 | 2112 |
| 集成加热器数量 | 2 |
| 控制面板 | Illuminated, graphical LCD display area; 8 front-panel buttons (Back, Cancel, Down arrow, Form Feed and Cut, Power, Reset, Select, Up arrow); 2 LEDs (Power, Status); On/Off buzzer |
| 最大滚轴重量 | 40 kg |
| 辊外径 | 180 mm |
| Maximum print speed (metric) | 21.2 m²/h (4-pass bidirectional), 13.4 m²/h (4-pass unidirectional), 14.3 m²/h (6-pass bidirectional), 9 m²/h (6-pass unidirectional), 8.9 m²/h (8-pass bidirectional), 6.9 m²/h (8-pass unidirectional), 7.7 m²/h (10-pass bidirectional), 5.5 m²/h (10-pass unidirectional), 6.4 m²/h (12-pass bidirectional), 4.5 m²/h (12-pass unidirectional), 5.5 m²/h (16-pass bidirectional), 3.4 m²/h (16-pass unidirectional), 3 m²/h (18-pass unidirectional) |
| 功耗（关闭） | 0.4 W |
| 功能 | |
| Source data-sheet | ICEcat.biz |
| 集成加热器安装定位 | Printing area; output area |
| 加热器温度 | 40 - 60 (drying module); 60 - 120 (curing module) |
| Acoustic power emissions (standby) | 5.1 B(A) |
| Installation steps | Professional installation is recommended |
| Maximum print length (imperial) | No physical limit (determined by RIP software or media roll length); recommended up to 100 ft |
| Media sizes standard (imperial rolls) | 23 to 42-in rolls |
| Media thickness (by paper path) | Up to 19.7 mil |
| Maximum media width (imperial) | 106.7 cm (42 ") |
| Non-printable area roll media (imperial) | 0.2 x 0.2 x 0.2 x 0.2 in |
| Package weight | 249.5 kg (550 lb) |
| Print margin roll | 5 x 5 x 5 x 5 mm |
| Print speed (imperial) | 228 ft²/h (4-pass bidirectional), 145 ft²/h (4-pass unidirectional), 154 ft²/h (6-pass bidirectional), 96 ft²/h (6-pass unidirectional), 95 ft²/h (8-pass bidirectional), 74 ft²/h (8-pass unidirectional), 83 ft²/h (10-pass bidirectional), 59 ft²/h (10-pass unidirectional), 69 ft²/h (12-pass bidirectional), 48 ft²/h (12-pass unidirectional), 59 ft²/h (16-pass bidirectional), 36 ft²/h (16-pass unidirectional), 32 ft²/h (18-pass unidirectional) |
| Roll maximum input | 1 |
| Acoustic pressure emissions (standby) | 39 dB(A) |
| Heater temperature setting | 104 - 140 (drying module); 140 - 248 (curing module) |
| Print head height (imperial) | 0.075 in |
| Maximum print speed (imperial) | 228 ft²/hr |
| Maximum print speed (imperial), note | Maximum rate of output for color image 100% color coverage (Bandes file) maximum roll size, quality 4-pass bidirectional print mode |
| Maximum print speed (metric), note | Maximum rate of output for color image 100% color coverage (Bandes file) maximum roll size, quality 4-pass bidirectional print mode |
| 气流 | No special ventilation required as per OSHA standards |
| 声功率排放量 | 7.5 B(A), 5.1 B(A) (standby) |
| 声压排放 | 56 dB(A), 39 dB(A) (standby) |
| 电源需求 | Input voltage (auto ranging) 200 to 240 VAC (-10% +6%), 50/60 Hz (+/- 3 Hz), 13 A max per power cord |
| 能源之星认证 | ✓ |
| 功耗（待机） | 1.8 kW |
| 能耗 | 3.5 kW maximum (only when warming up) |
| 功耗（节能） | < 72 watts |
| 推荐工作适度范围 | 20 to 80% RH (non-condensing) |
| 储存温度范围 | -25 - 55 °C |
| 推荐操作温度范围 | 18 - 25 °C |
| 运行湿度范围 | 20-80 % |
| 操作温度范围 | 15 - 30 °C |
| 存储湿度 | 20 to 90% RH (non-condensing) |
| 兼容墨水类型 | HP Latex Inks |
| 电磁兼容性 | Compliant with Class A requirements, EU (EMC Directive) |
| 安全 | EU (LVD and EN 60950-1 compliant); Russia (GOST) |
| 认证 | Energy Star; WEEE; EU RoHS; REACH; EuP; FEMP |
| 打印头重量 | 1.9 mm |
| Su opinión | Añadir opinión |
|---|---|
| Valoración | ☆☆☆☆☆ (Sin valoración) |
| Opiniones y comentarios, HP CH955A#B19 | product |