HP CH956A#B19
DESIGNJET L25500 60 PLOT 1200DPI 60 INCH ENET IN
| Identificador: | 54262 |
|---|---|
| Marca: | HP |
| P/N: | CH956A#B19 |
| EAN: | 884962402788 |
| Disponibilidad: | |
| Stock: | No Disponible |
HP Designjet L25500 60-in Printer
DESIGNJET L25500 60 PLOT 1200DPI 60 INCH ENET IN
Overview
Increase business opportunities with a printer that delivers unrivaled versatility with a wide range of outdoor and indoor applications. Experience easy, reliable HP Designjet printing and attract the attention of environmentally-conscious customers.
Features
Meet many needs with one device, offering unrivaled versatility for outdoor/indoor applications1.
⁍ Produce outdoor signage such as billboards, bus shelters and vehicle wraps, with durability comparable to eco-solvent inks2.
Experience easy, unattended, low maintenance printing with proven HP Thermal Inkjet Technology.
⁍ Enjoy easy printing with proven HP Thermal Inkjet Technology, water-based HP Latex Inks and Original HP printheads which enable automatic maintenance and unattended printing.
Print with the environment in mind and create an improved working environment for your employees.
⁍ Water-based HP Latex Inks do not require hazard warning labels, are non-flammable, non-combustible3 and no special ventilation is required4.
1 The HP Designjet L25500 Printer produces an extremely broad range of both outdoor and indoor applications from a single device, which surpasses the number of different applications that traditional eco-solvent printers or water-based printers can produce.
2 HP image permanence and scratch, smudge, and water resistance estimates by HP Image Permanence Lab. Outdoor display permanence tested according to SAE J2527 using HP Latex and eco-solvent ink on a range of media, including HP media; in a vertical display orientation in simulated nominal outdoor display conditions for select high and low climates, including exposure to direct sunlight and water; performance may vary as environmental conditions change. Scratch, smudge, and water resistance tested using HP Latex and eco-solvent inks on a wide range of media, including HP media; water resistance is comparable when printed on water-resistant substrates. Laminated display permanence using GBC clear gloss 1.7 mil hot laminate. Results may vary based on specific media performance and scratch testing methodology. For more information, see www.hp.com/go/supplies/printpermanence
3 HP water-based Latex Inks are not classified as flammable or combustible liquids under the USDOT or international transportation regulations. These materials have been tested per the Pensky-Martins Closed Cup method and the flash point is greater than 110 deg C.
4 Special ventilation is not required to meet US OSHA requirements on occupational exposure to VOCs from HP Latex Inks. Special ventilation equipment installation is at the discretion of the customer—no specific HP recommendation is intended. Typically no air discharge permitting required with HP Latex Inks. Customers should consult countryand local requirements and regulations.
| Warranty: One-year limited hardware warranty. Warranty and support options vary by product, country and local legal requirements. |
| Productos relacionados | Ver |
|---|
| Referencia | HP CH956A#B19 |
|---|---|
| Boje za štampanje | Cyan, magenta, yellow, black, light cyan, light magenta |
| Podržane vrste medija | Banners, vinyls, films, fabrics, papers, mesh with liner |
| maksimalna širina medija | 1524 mm |
| Debljina mdijuma (metrički) | > 0.02 in > 0.5 mm |
| Broj print kertridža | 6 (1 each cyan, magenta, yellow, black, light cyan, light magenta) |
| Tehnologija štampe | Inkjet |
| Zapremina punjenja štampača (metrički) | 775 ml |
| Glava štampača | 6 (2 x yellow/black, 2 x cyan/light cyan, 2 x light magenta/magenta) |
| maksimalna dužina rolne | No physical limit (determined by RIP software or media roll length); recommended up to 30 m No physical limit (determined by RIP software or media roll length); recommended up to 100 ft |
| Interfejs | Gigabit Ethernet (1000Base-T) |
| Dimenzije | 1524 mm |
| Dimenzije pakovanja | 269 x 81 x 118.4 cm (105.9 x 31.9 x 46.6 ") |
| Brzina štampanja | 22.8 m²/h (4-pass bidirectional), 16.5 m²/h (6-pass bidirectional), 10.6 m²/h (8-pass bidirectional), 9 m²/h (10-pass bidirectional), 7.6 m²/h (12-pass bidirectional), 6.3 m²/h (16-pass bidirectional) |
| Veličina | 246.4 x 69.8 x 137.2 152.4 cm (97 x 27.5 x 54 60 ") |
| Spreman za umrežavanje | ✓ |
| Dimenzije pakovanja | 2465 x 690 x 1370 mm |
| Težina | 181 kg |
| Kvalitet štampe (kolor, najbolji kvalitet) | < 1200 x 1200 DPI |
| Kap mastila | 12 pl |
| kvalitet štampe (crno-belo, najbolji kvalitet) | 1200x1200 DPI |
| Maksimalna dužina štampe | No physical limit (determined by RIP software or media length); recommended > 30 m |
| prilagodljive veličine medija | 58 to 152.4 cm rolls |
| Rukovanje medijima | Roll feed, take-up reel, automatic cutter for vinyl, paper-based media, backlit polyester film and thin banners |
| Standardno rukovanje papirom/input | Roll feed |
| Standardno rukovanje papirom/output | Take-up reel |
| štrcaljke | 2112 |
| Broj integrisanih grejača | 2 |
| Control panel | Illuminated, graphical LCD display area; 8 front-panel buttons (Back, Cancel, Down arrow, Form Feed and Cut, Power, Reset, Select, Up arrow); 2 LEDs (Power, Status); On/Off buzzer |
| najveća težina rolne | 40 kg |
| Spoljni prečnik rolne | 180 mm |
| Maximum print speed (metric) | 22.8 m²/h (4-pass bidirectional), 15.4 m²/h (4-pass unidirectional), 16.5 m²/h (6-pass bidirectional), 10.3 m²/h (6-pass unidirectional), 10.6 m²/h (8-pass bidirectional), 7.9 m²/h (8-pass unidirectional), 9 m²/h (10-pass bidirectional), 6.3 m²/h (10-pass unidirectional), 7.6 m²/h (12-pass bidirectional), 5.1 m²/h (12-pass unidirectional), 6.3 m²/h (16-pass bidirectional), 3.9 m²/h (16-pass unidirectional), 3.4 m²/h (18-pass unidirectional) |
| Potrošnja energije (isključen) | 0.4 W |
| Funkcije | |
| Mesto integrisanih grejača | Printing area; output area |
| Temperatura grejača | 40 - 60 (drying module); 60 - 120 (curing module) |
| Acoustic power emissions (standby) | 5.1 B(A) |
| koraci za instalaciju | Professional installation is recommended |
| Maximum print length (imperial) | No physical limit (determined by RIP software or media roll length); recommended up to 100 ft |
| Media sizes standard (imperial rolls) | 23 to 60-in rolls |
| Media thickness (by paper path) | Up to 19.7 mil |
| Maximum media width (imperial) | 152.4 cm (60 ") |
| Non-printable area roll media (imperial) | 0.2 x 0.2 x 0.2 x 0.2 in |
| Package weight | 309.3 kg (682 lb) |
| Print margin roll | 5 x 5 x 5 x 5 mm |
| Print speed (imperial) | 246 ft²/h (4-pass bidirectional), 178 ft²/h (6-pass bidirectional), 114 ft²/h (8-pass bidirectional), 97 ft²/h (10-pass bidirectional), 81 ft²/h (12-pass bidirectional), 68 ft²/h (16-pass bidirectional) |
| Roll maximum input | 1 |
| Acoustic pressure emissions (standby) | 39 dB(A) |
| Heater temperature setting | 104 - 140 (drying module); 140 - 248 (curing module) |
| Print head height (imperial) | 0.075 in |
| Maximum print speed (imperial) | 246 ft²/hr |
| Maximum print speed (imperial), note | Maximum rate of output for color image 100% color coverage (Bandes file) maximum roll size, quality 4-pass bidirectional print mode |
| Maximum print speed (metric), note | Maximum rate of output for color image 100% color coverage (Bandes file) maximum roll size, quality 4-pass bidirectional print mode |
| Tok vazduha | No special ventilation required as per OSHA standards |
| Source data-sheet | ICEcat.biz |
| Snaga zvuka | 7.5 B(A), 5.1 B(A) (standby) |
| Nivo pritiska zvuka | 56 dB(A), 39 dB(A) (standby) |
| Potrošnja struje | Input voltage (auto ranging) 220 to 240 VAC (-10% +6%), 50/60 Hz (+/- 3 Hz), 15 A max per power cord |
| Energy Star sertifikat | ✓ |
| Potrošnja energije (standbz) | 2.6 kW |
| Potrošnja energije | 4.8 kW maximum (only when warming up) |
| Potrošnja energije (PowerSave) | < 72 watts |
| Preporučeni opseg vlažnosti pri radu | 20 to 80% RH (non-condensing) |
| Dozvoljeni raspon temperatura za skladištenje | -25 - 55 °C |
| Preporučeni opseg radne temperature | 18 - 25 °C |
| Radni opseg vlažnosti | 20-80 % |
| Raspon radne temperature (T-T) | 15 - 30 °C |
| vlažnost vazduha skladištenja | 20 to 90% RH (non-condensing) |
| Kompatibilne vrste mastila, zalihe | HP Latex Inks |
| Elektromagnetna kompatibilnost | Compliant with Class A requirements, EU (EMC Directive) |
| Bezbednost | EU (LVD and EN 60950-1 compliant); Russia (GOST) |
| Sertifikacija | Energy Star; WEEE; EU RoHS; REACH; EuP; FEMP |
| Visina glave za štampanje | 1.9 mm |
| Su opinión | Añadir opinión |
|---|---|
| Valoración | ☆☆☆☆☆ (Sin valoración) |
| Opiniones y comentarios, HP CH956A#B19 | product |