HP CH956A#B19
DESIGNJET L25500 60 PLOT 1200DPI 60 INCH ENET IN
| Identificador: | 54262 |
|---|---|
| Marca: | HP |
| P/N: | CH956A#B19 |
| EAN: | 884962402788 |
| Disponibilidad: | |
| Stock: | No Disponible |
HP Designjet L25500 60-in Printer
DESIGNJET L25500 60 PLOT 1200DPI 60 INCH ENET IN
Overview
Increase business opportunities with a printer that delivers unrivaled versatility with a wide range of outdoor and indoor applications. Experience easy, reliable HP Designjet printing and attract the attention of environmentally-conscious customers.
Features
Meet many needs with one device, offering unrivaled versatility for outdoor/indoor applications1.
⁍ Produce outdoor signage such as billboards, bus shelters and vehicle wraps, with durability comparable to eco-solvent inks2.
Experience easy, unattended, low maintenance printing with proven HP Thermal Inkjet Technology.
⁍ Enjoy easy printing with proven HP Thermal Inkjet Technology, water-based HP Latex Inks and Original HP printheads which enable automatic maintenance and unattended printing.
Print with the environment in mind and create an improved working environment for your employees.
⁍ Water-based HP Latex Inks do not require hazard warning labels, are non-flammable, non-combustible3 and no special ventilation is required4.
1 The HP Designjet L25500 Printer produces an extremely broad range of both outdoor and indoor applications from a single device, which surpasses the number of different applications that traditional eco-solvent printers or water-based printers can produce.
2 HP image permanence and scratch, smudge, and water resistance estimates by HP Image Permanence Lab. Outdoor display permanence tested according to SAE J2527 using HP Latex and eco-solvent ink on a range of media, including HP media; in a vertical display orientation in simulated nominal outdoor display conditions for select high and low climates, including exposure to direct sunlight and water; performance may vary as environmental conditions change. Scratch, smudge, and water resistance tested using HP Latex and eco-solvent inks on a wide range of media, including HP media; water resistance is comparable when printed on water-resistant substrates. Laminated display permanence using GBC clear gloss 1.7 mil hot laminate. Results may vary based on specific media performance and scratch testing methodology. For more information, see www.hp.com/go/supplies/printpermanence
3 HP water-based Latex Inks are not classified as flammable or combustible liquids under the USDOT or international transportation regulations. These materials have been tested per the Pensky-Martins Closed Cup method and the flash point is greater than 110 deg C.
4 Special ventilation is not required to meet US OSHA requirements on occupational exposure to VOCs from HP Latex Inks. Special ventilation equipment installation is at the discretion of the customer—no specific HP recommendation is intended. Typically no air discharge permitting required with HP Latex Inks. Customers should consult countryand local requirements and regulations.
| Warranty: One-year limited hardware warranty. Warranty and support options vary by product, country and local legal requirements. |
| Productos relacionados | Ver |
|---|
| Referencia | HP CH956A#B19 |
|---|---|
| Culorile de imprimare | Cyan, magenta, yellow, black, light cyan, light magenta |
| Tipuri de media acceptate | Banners, vinyls, films, fabrics, papers, mesh with liner |
| Lăţimea maximă mass-media | 1524 mm |
| Grosimea mass-media | > 0.02 in > 0.5 mm |
| Numărul de cartuşe de printare | 6 (1 each cyan, magenta, yellow, black, light cyan, light magenta) |
| Tehnologia tipăririi | Inkjet |
| Volumul cartuş de imprimare (sistem metric) | 775 ml |
| Cap tipărire | 6 (2 x yellow/black, 2 x cyan/light cyan, 2 x light magenta/magenta) |
| Lungime maximă a rolei | No physical limit (determined by RIP software or media roll length); recommended up to 30 m No physical limit (determined by RIP software or media roll length); recommended up to 100 ft |
| Interfaţă | Gigabit Ethernet (1000Base-T) |
| Dimensiuni | 1524 mm |
| Dimensiunile ambalajului (L: | 269 x 81 x 118.4 cm (105.9 x 31.9 x 46.6 ") |
| Viteza de imprimare | 22.8 m²/h (4-pass bidirectional), 16.5 m²/h (6-pass bidirectional), 10.6 m²/h (8-pass bidirectional), 9 m²/h (10-pass bidirectional), 7.6 m²/h (12-pass bidirectional), 6.3 m²/h (16-pass bidirectional) |
| Mărime | 246.4 x 69.8 x 137.2 152.4 cm (97 x 27.5 x 54 60 ") |
| Gata pentru reţea | ✓ |
| Dimensiuni(LxAxI) | 2465 x 690 x 1370 mm |
| Greutate | 181 kg |
| Calitatea tipăririi(color,cea mai bună calitate) | < 1200 x 1200 DPI |
| Picătură de cerneală | 12 pl |
| Calitate imprimare (negru, cea mai bună calitate) | 1200x1200 DPI |
| Lungimea maximă a tipăririi | No physical limit (determined by RIP software or media length); recommended > 30 m |
| Mărime medie obişnuită | 58 to 152.4 cm rolls |
| Manipularea mass-media | Roll feed, take-up reel, automatic cutter for vinyl, paper-based media, backlit polyester film and thin banners |
| Manipulare standard hârtie / intrare | Roll feed |
| Manipulare standard hârtie / ieşire | Take-up reel |
| Direcţionarea fluidului din capul de tipărire | 2112 |
| Numărul încălzitoarelor integrate | 2 |
| Panoul de control | Illuminated, graphical LCD display area; 8 front-panel buttons (Back, Cancel, Down arrow, Form Feed and Cut, Power, Reset, Select, Up arrow); 2 LEDs (Power, Status); On/Off buzzer |
| Greutatea maximă Roll | 40 kg |
| Diametrul exterior al cilindrului | 180 mm |
| Viteza maximă de imprimare (sistem metric) | 22.8 m²/h (4-pass bidirectional), 15.4 m²/h (4-pass unidirectional), 16.5 m²/h (6-pass bidirectional), 10.3 m²/h (6-pass unidirectional), 10.6 m²/h (8-pass bidirectional), 7.9 m²/h (8-pass unidirectional), 9 m²/h (10-pass bidirectional), 6.3 m²/h (10-pass unidirectional), 7.6 m²/h (12-pass bidirectional), 5.1 m²/h (12-pass unidirectional), 6.3 m²/h (16-pass bidirectional), 3.9 m²/h (16-pass unidirectional), 3.4 m²/h (18-pass unidirectional) |
| Consum de energie (off) | 0.4 W |
| Funcţii | |
| Locaţia de elementele de încălzire integrat | Printing area; output area |
| Temperatura de încălzire | 40 - 60 (drying module); 60 - 120 (curing module) |
| Emisiile acustice de putere (în aşteptare) | 5.1 B(A) |
| Paşi instalare | Professional installation is recommended |
| Lungime maximă de imprimare (Imperial) | No physical limit (determined by RIP software or media roll length); recommended up to 100 ft |
| Media dimensiuni standard (role Imperial) | 23 to 60-in rolls |
| Media grosime (suport de hârtie cale) | Up to 19.7 mil |
| Lăţimea maximă mass-media (Imperial) | 152.4 cm (60 ") |
| Non-media printable zona Roll (Imperial) | 0.2 x 0.2 x 0.2 x 0.2 in |
| Greutate pachet | 309.3 kg (682 lb) |
| Limita de printare pentru hârtia roll | 5 x 5 x 5 x 5 mm |
| Viteza de imprimare (Imperial) | 246 ft²/h (4-pass bidirectional), 178 ft²/h (6-pass bidirectional), 114 ft²/h (8-pass bidirectional), 97 ft²/h (10-pass bidirectional), 81 ft²/h (12-pass bidirectional), 68 ft²/h (16-pass bidirectional) |
| Roll maxime de intrare | 1 |
| Emisiile de presiune acustică(în aşteptare) | 39 dB(A) |
| Heater temperatura de setare | 104 - 140 (drying module); 140 - 248 (curing module) |
| Înălţimea capului de imprimare (Imperial) | 0.075 in |
| Viteza maximă de imprimare (Imperial) | 246 ft²/hr |
| Viteza maximă de imprimare (Imperial), nota | Maximum rate of output for color image 100% color coverage (Bandes file) maximum roll size, quality 4-pass bidirectional print mode |
| Viteza maximă de imprimare (sistem metric), nota | Maximum rate of output for color image 100% color coverage (Bandes file) maximum roll size, quality 4-pass bidirectional print mode |
| Fluxul de aer | No special ventilation required as per OSHA standards |
| Sursa de date-sheet | ICEcat.biz |
| Emisii ale puterii acustice | 7.5 B(A), 5.1 B(A) (standby) |
| Emisiuni de presiune acustică | 56 dB(A), 39 dB(A) (standby) |
| Cerinţe de energie | Input voltage (auto ranging) 220 to 240 VAC (-10% +6%), 50/60 Hz (+/- 3 Hz), 15 A max per power cord |
| Certificat Energy Star | ✓ |
| Consum de energie (de aşteptare) | 2.6 kW |
| Puterea consumată | 4.8 kW maximum (only when warming up) |
| Consum (Regim) | < 72 watts |
| Intervalul recomandat de umiditate | 20 to 80% RH (non-condensing) |
| Intervalul de temperatură pentru depozitare | -25 - 55 °C |
| Intervalul recomandat de temperatura pentru funcţionare(T-T) | 18 - 25 °C |
| Interval relativ operaţional de umiditate | 20-80 % |
| Interval de temperatură de funcţionare (T-T) | 15 - 30 °C |
| Gama de stocare umiditate relativă | 20 to 90% RH (non-condensing) |
| Tipuri de rezerve de cerneală compatibilă | HP Latex Inks |
| Compatibilitate electromagnetică | Compliant with Class A requirements, EU (EMC Directive) |
| Siguranţă | EU (LVD and EN 60950-1 compliant); Russia (GOST) |
| Certificare | Energy Star; WEEE; EU RoHS; REACH; EuP; FEMP |
| Imprimare înălţimea capului | 1.9 mm |
| Su opinión | Añadir opinión |
|---|---|
| Valoración | ☆☆☆☆☆ (Sin valoración) |
| Opiniones y comentarios, HP CH956A#B19 | product |