HP J9298A#KIT
PROCURVE SWITCH 2520G-8 POE CPNT PROMO 3X2 IN
| Identificador: | 54436 |
|---|---|
| Marca: | HP |
| P/N: | J9298A#KIT |
| EAN: | 884420221845 |
| Disponibilidad: | |
| Stock: | No Disponible |
PROCURVE SWITCH 2520G-8 POE CPNT PROMO 3X2 IN
- €
1706.38
* precio sin IVA Informativo Descatalogado
HP ProCurve 2520G-8 PoE Switch
PROCURVE SWITCH 2520G-8 POE CPNT PROMO 3X2 IN
| Garantía: Garantía de por vida: mientras sea propietario del producto, con sustitución anticipada al día siguiente laborable (disponible en la mayoría de los países) |
| Productos relacionados | Ver |
|---|
| Referencia | HP J9298A#KIT |
|---|---|
| Latencia | 100 Mb: < 5.3 µs (LIFO 64-byte packets); 1000 Mb: < 2.7 µs (LIFO 64-byte packets) |
| Capacidad de conmutación | Switching capacity: 20 Gbps |
| Tamaño de la tabla de direcciones | 8000 entries |
| Plataforma de gestión | Products: HP ProCurve Manager Plus; HP ProCurve Manager; Access Methods: command-line interface; Web browser; configuration menu; out-of-band management (serial RS-232C); Supported MIBs: IEEE 802.3 Ethernet MIB; Repeater MIB; Ethernet Interface MIB |
| Protocolos de red admitidos | CPU DoS Protection; RFC 1591 DNS (client); SSHv1/SSHv2 Secure Shell; IEEE 802.1D MAC Bridges; IEEE 802.1p Priority; IEEE 802.1Q VLANs; IEEE 802.1s Multiple Spanning Trees; IEEE 802.1w Rapid Reconfiguration of Spanning Tree; IEEE 802.3 Type 10BASE-T; IEEE 802.3ab 1000BASE-T; IEEE 802.3ad Link Aggregation Control Protocol (LACP); IEEE 802.3af Power over Ethernet; IEEE 802.3x Flow Control; RFC 768 UDP; RFC 783 TFTP Protocol (revision 2); RFC 792 ICMP; RFC 793 TCP; RFC 826 ARP; RFC 854 TELNET; RFC 868 Time Protocol; RFC 951 BOOTP; RFC 1350 TFTP Protocol (revision 2); RFC 1542 BOOTP Extensions; RFC 2030 Simple Network Time Protocol (SNTP) v4; RFC 2131 DHCP; RFC 3376 IGMPv3 (host joins only); RFC 1981 IPv6 Path MTU Discovery; RFC 2460 IPv6 Specification; RFC 2925 Remote Operations MIB (Ping only); RFC 3315 DHCPv6 (client only); RFC 3513 IPv6 Addressing Architecture; RFC 3596 DNS Extension for IPv6; RFC 4022 MIB for TCP; RFC 4113 MIB for UDP; RFC 4251 SSHv6 Architecture; RFC 4252 SSHv6 Authentication; RFC 4253 SSHv6 Transport Layer; RFC 4254 SSHv6 Connection; RFC 4293 MIB for IP; RFC 4419 Key Exchange for SSH; RFC 4443 ICMPv6; RFC 4861 IPv6 Neighbor Discovery; RFC 4862 IPv6 Stateless Address Auto-configuration; RFC 1213 MIB II; RFC 1493 Bridge MIB; RFC 2021 RMONv2 MIB; RFC 2613 SMON MIB; RFC 2618 RADIUS Client MIB; RFC 2620 RADIUS Accounting MIB; RFC 2665 Ethernet-Like-MIB; RFC 2668 802.3 MAU MIB; RFC 2674 802.1p and IEEE 802.1Q Bridge MIB; RFC 2737 Entity MIB (Version 2); RFC 2863 The Interfaces Group MIB; RFC 2474 Diffserv precedence, with 4 queues per port; RFC 2475 DiffServ Architecture; RFC 2597 DiffServ Assured Forwarding (AF); RFC 2598 DiffServ Expedited Forwarding (EF); IEEE 802.1X Port Based Network Access Control; RFC 1492 TACACS+; RFC 2138 RADIUS Authentication; RFC 2866 RADIUS Accounting; Secure Sockets Layer (SSL) |
| Memoria y procesador | Processor: Freescale PowerPC 8313 @ 266 MHz, 32 MB flash, 128 MB DDR2 SDRAM; packet buffer size: 512 KB dynamically allocated |
| Velocidad | 14.8 million pps |
| Montaje en bastidor | Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (rack-mounting kit available); horizontal surface mounting; wall mounting |
| Dimensiones (Ancho x Profundidad x Altura) | 25.4 x 15.95 x 4.45 cm |
| Peso | 1.66 kg |
| Energía sobre Ethernet (PoE), soporte | 67 W |
| Corriente de entrada | 1.5 A |
| Frecuencia de entrada | 50 / 60 Hz |
| Voltaje de entrada | 100-240 VAC |
| Cumplimiento de estándares del mercado | Generic: EN 55024, CISPR 24; EN: EN 55024, CISPR 24; ESD: IEC 61000-4-2; Radiated: IEC 61000-4-3; EFT/Burst: IEC 61000-4-4; Surge: IEC 61000-4-5; Conducted: IEC 61000-4-6; Power frequency magnetic field: IEC 61000-4-8; Voltage dips and interruptions: IEC 61000-4-11; Harmonics: EN 61000-3-2, IEC 61000-3-2; Flicker: EN 61000-3-3, IEC 61000-3-3 |
| Tipo de chasis | 1U height |
| Tamaño | 16 x 25.4 x 4.45. (6.28 x 10 x 1.75.) |
| Puertos de entrada y salida (E/S) | 8 RJ-45 auto-sensing 10/100 PoE ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX, IEEE 802.3af PoE); Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only; Media type: Auto-MDIX; 2 dual-personality ports - each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or as a SFP slot (for use with SFP transceivers); 1 RJ-45 serial console port |
| Emisiones de presión acústica | Power: 0 dB, Pressure: 0 dB |
| Consumo energético | 86.2 W |
| Potencia disponible | 1.5 A |
| Requisitos de energía | Voltage: 100 -240 VAC; Frequency: 50 /60 Hz |
| Disipación del calor | 89 BTU/hr (93.9 kJ/hr) |
| Seguridad | cUL (CSA 22.2 No. 60950); CE Labeled; UL 60950-1; UL Listed; CAN/CSA 22.2 No. 60950; EN 60825; AS/NZS 60950; IEC 60950-1; EN 60950-1 |
| Humedad relativa | 15% to 95% @ 40ºC, non-condensing |
| Altitud operacional | > 3 km. |
| Alcance de temperatura operativa | 0 - 45 °C |
| Temperatura | -40 - 70 °C |
| Húmedad (en almacenaje) | 15% to 95% @ 65ºC, non-condensing |
| Compatibilidad electromagnética | FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; ICES-003 (Canada); AS/NZS CISPR 22; IEC/EN 61000-3-2; IEC/EN 61000-3-3; IEC 61000:4-2, 4-3, 4-4, 4-5, 4-6, 4-8, 4-11 |
| Altitud de funcionamiento (imperial) | up to 10000 ft. |
| Source data-sheet | ICEcat.biz |
| Su opinión | Añadir opinión |
|---|---|
| Valoración | ☆☆☆☆☆ (Sin valoración) |
| Opiniones y comentarios, HP J9298A#KIT | product |