HP CH956A#B19
DESIGNJET L25500 60 PLOT 1200DPI 60 INCH ENET IN
| Identificador: | 54262 |
|---|---|
| Marca: | HP |
| P/N: | CH956A#B19 |
| EAN: | 884962402788 |
| Disponibilidad: | |
| Stock: | No Disponible |
HP Designjet L25500 60-in Printer
DESIGNJET L25500 60 PLOT 1200DPI 60 INCH ENET IN
Overview
Increase business opportunities with a printer that delivers unrivaled versatility with a wide range of outdoor and indoor applications. Experience easy, reliable HP Designjet printing and attract the attention of environmentally-conscious customers.
Features
Meet many needs with one device, offering unrivaled versatility for outdoor/indoor applications1.
⁍ Produce outdoor signage such as billboards, bus shelters and vehicle wraps, with durability comparable to eco-solvent inks2.
Experience easy, unattended, low maintenance printing with proven HP Thermal Inkjet Technology.
⁍ Enjoy easy printing with proven HP Thermal Inkjet Technology, water-based HP Latex Inks and Original HP printheads which enable automatic maintenance and unattended printing.
Print with the environment in mind and create an improved working environment for your employees.
⁍ Water-based HP Latex Inks do not require hazard warning labels, are non-flammable, non-combustible3 and no special ventilation is required4.
1 The HP Designjet L25500 Printer produces an extremely broad range of both outdoor and indoor applications from a single device, which surpasses the number of different applications that traditional eco-solvent printers or water-based printers can produce.
2 HP image permanence and scratch, smudge, and water resistance estimates by HP Image Permanence Lab. Outdoor display permanence tested according to SAE J2527 using HP Latex and eco-solvent ink on a range of media, including HP media; in a vertical display orientation in simulated nominal outdoor display conditions for select high and low climates, including exposure to direct sunlight and water; performance may vary as environmental conditions change. Scratch, smudge, and water resistance tested using HP Latex and eco-solvent inks on a wide range of media, including HP media; water resistance is comparable when printed on water-resistant substrates. Laminated display permanence using GBC clear gloss 1.7 mil hot laminate. Results may vary based on specific media performance and scratch testing methodology. For more information, see www.hp.com/go/supplies/printpermanence
3 HP water-based Latex Inks are not classified as flammable or combustible liquids under the USDOT or international transportation regulations. These materials have been tested per the Pensky-Martins Closed Cup method and the flash point is greater than 110 deg C.
4 Special ventilation is not required to meet US OSHA requirements on occupational exposure to VOCs from HP Latex Inks. Special ventilation equipment installation is at the discretion of the customer—no specific HP recommendation is intended. Typically no air discharge permitting required with HP Latex Inks. Customers should consult countryand local requirements and regulations.
| Warranty: One-year limited hardware warranty. Warranty and support options vary by product, country and local legal requirements. |
| Productos relacionados | Ver |
|---|
| Referencia | HP CH956A#B19 |
|---|---|
| Impressió de colors | Cyan, magenta, yellow, black, light cyan, light magenta |
| Tipus de suports admesos | Banners, vinyls, films, fabrics, papers, mesh with liner |
| Amplada màxima de continguts | 1524 mm |
| gruix promig | > 0.02 in > 0.5 mm |
| Número de cartutxos d'impressió | 6 (1 each cyan, magenta, yellow, black, light cyan, light magenta) |
| Tecnologia d'impressió | Inkjet |
| Cartutx d'impressió de volum (tones) | 775 ml |
| Capçal d'impressió | 6 (2 x yellow/black, 2 x cyan/light cyan, 2 x light magenta/magenta) |
| Longitud màxima de rotllo | No physical limit (determined by RIP software or media roll length); recommended up to 30 m No physical limit (determined by RIP software or media roll length); recommended up to 100 ft |
| Interfície | Gigabit Ethernet (1000Base-T) |
| Dimensions | 1524 mm |
| dimensions (W x D x H) | 269 x 81 x 118.4 cm (105.9 x 31.9 x 46.6 ") |
| Velocitat d'impressió | 22.8 m²/h (4-pass bidirectional), 16.5 m²/h (6-pass bidirectional), 10.6 m²/h (8-pass bidirectional), 9 m²/h (10-pass bidirectional), 7.6 m²/h (12-pass bidirectional), 6.3 m²/h (16-pass bidirectional) |
| Mida | 246.4 x 69.8 x 137.2 152.4 cm (97 x 27.5 x 54 60 ") |
| preparat per a xarxa | ✓ |
| Dimensions W x D x H | 2465 x 690 x 1370 mm |
| Pes | 181 kg |
| Qualitat d'impressió (color, qualitat òptima) | < 1200 x 1200 DPI |
| Gota de tinta | 12 pl |
| Qualitat d'impressió (negre, qualitat òptima) | 1200x1200 DPI |
| Longitud màxima d'impressió | No physical limit (determined by RIP software or media length); recommended > 30 m |
| tamany de contingut personalitzat | 58 to 152.4 cm rolls |
| Manipulació de media | Roll feed, take-up reel, automatic cutter for vinyl, paper-based media, backlit polyester film and thin banners |
| Manipulació del paper estàndard / entrada | Roll feed |
| Manipulació del paper estàndard / sortida | Take-up reel |
| Boques de capçal d'impressió | 2112 |
| nombre d'escalfadors integrats | 2 |
| Panell de control | Illuminated, graphical LCD display area; 8 front-panel buttons (Back, Cancel, Down arrow, Form Feed and Cut, Power, Reset, Select, Up arrow); 2 LEDs (Power, Status); On/Off buzzer |
| Pes màxim de rotllo | 40 kg |
| Diàmetre extern del rotlle | 180 mm |
| Màxima velocitat d'impressió (mètrica) | 22.8 m²/h (4-pass bidirectional), 15.4 m²/h (4-pass unidirectional), 16.5 m²/h (6-pass bidirectional), 10.3 m²/h (6-pass unidirectional), 10.6 m²/h (8-pass bidirectional), 7.9 m²/h (8-pass unidirectional), 9 m²/h (10-pass bidirectional), 6.3 m²/h (10-pass unidirectional), 7.6 m²/h (12-pass bidirectional), 5.1 m²/h (12-pass unidirectional), 6.3 m²/h (16-pass bidirectional), 3.9 m²/h (16-pass unidirectional), 3.4 m²/h (18-pass unidirectional) |
| Consum d'energia (off) | 0.4 W |
| Funcions | |
| situació dels escalfadors integrats | Printing area; output area |
| temperatura d'escalfador | 40 - 60 (drying module); 60 - 120 (curing module) |
| emissions de potència acústica (en espera) | 5.1 B(A) |
| Passos de la instal · lació | Professional installation is recommended |
| Longitud màxima d'impressió (imperial) | No physical limit (determined by RIP software or media roll length); recommended up to 100 ft |
| mides de media estàndard (rotllos imperials) | 23 to 60-in rolls |
| gruix de media (de paper) | Up to 19.7 mil |
| Amplada màxima de media (imperial) | 152.4 cm (60 ") |
| rotllo de media en àrea no imprimible (imperial) | 0.2 x 0.2 x 0.2 x 0.2 in |
| pes de paquet | 309.3 kg (682 lb) |
| marge d'impressió rotllo | 5 x 5 x 5 x 5 mm |
| Velocitat d'impressió (imperial) | 246 ft²/h (4-pass bidirectional), 178 ft²/h (6-pass bidirectional), 114 ft²/h (8-pass bidirectional), 97 ft²/h (10-pass bidirectional), 81 ft²/h (12-pass bidirectional), 68 ft²/h (16-pass bidirectional) |
| entrada màxima de rotllo | 1 |
| emissions de pressió acústica (en espera) | 39 dB(A) |
| ajust de temperatura de l'escalfador | 104 - 140 (drying module); 140 - 248 (curing module) |
| alçada de capçal d'impressió (imperial) | 0.075 in |
| Màxima velocitat d'impressió (imperial) | 246 ft²/hr |
| Màxima velocitat d'impressió (imperial), nota | Maximum rate of output for color image 100% color coverage (Bandes file) maximum roll size, quality 4-pass bidirectional print mode |
| Màxima velocitat d'impressió (mètrica), nota | Maximum rate of output for color image 100% color coverage (Bandes file) maximum roll size, quality 4-pass bidirectional print mode |
| ventilació | No special ventilation required as per OSHA standards |
| Source data-sheet | ICEcat.biz |
| emissions de potència acústica | 7.5 B(A), 5.1 B(A) (standby) |
| emissions pressió acústica | 56 dB(A), 39 dB(A) (standby) |
| Requisits d'alimentació | Input voltage (auto ranging) 220 to 240 VAC (-10% +6%), 50/60 Hz (+/- 3 Hz), 15 A max per power cord |
| certificat Energy Star | ✓ |
| Consum d'energia (en espera) | 2.6 kW |
| Consum d'energia | 4.8 kW maximum (only when warming up) |
| Consum d'energia (d'energia) | < 72 watts |
| rang d'operació d'humitat recomanada | 20 to 80% RH (non-condensing) |
| Rang de temperatura (T-T) | -25 - 55 °C |
| temperatures de funcionament recomanat (T-T) | 18 - 25 °C |
| Rang d'humitat | 20-80 % |
| Interval de temperatura de funcionament (T-T) | 15 - 30 °C |
| Humitat d'emmagatzematge | 20 to 90% RH (non-condensing) |
| tipus de tinta compatible, subministraments | HP Latex Inks |
| Compatibilitat electromagnètica | Compliant with Class A requirements, EU (EMC Directive) |
| Seguretat | EU (LVD and EN 60950-1 compliant); Russia (GOST) |
| Certificació | Energy Star; WEEE; EU RoHS; REACH; EuP; FEMP |
| alçada de capçal d'impressió | 1.9 mm |
| Su opinión | Añadir opinión |
|---|---|
| Valoración | ☆☆☆☆☆ (Sin valoración) |
| Opiniones y comentarios, HP CH956A#B19 | product |