| Referencia | HP A7533A |
|---|
| Operating altitude | 3000 m |
|---|
| Weight | 362 g |
|---|
| Management platform | 10/100 Ethernet (RJ-45), serial port |
|---|
| Full duplex | ✓ |
|---|
| I/O ports | Fibre Channel ports: 8 internal 1-2Gb server ports, 4 external 4Gb auto-sensing ports (ships with two 4Gb SFPs); Port types: FL_Port, F_Port, and E_Port; self-discovery based on switch type (U_Port) |
|---|
| Non-operating relative humidity (non-condensing) | 5-90 % |
|---|
| Operating humidity range | 20-80 % |
|---|
| Operating temperature range (T-T) | 10 - 35 °C |
|---|
| Storage temperature range (T-T) | -25-70 °C |
|---|
| Bandwidth | 4 Gbit/sec line speed, full duplex |
|---|
| Bundled software | Brocade Access Gateway; Frame Filtering; Advanced Zoning; Web Tools |
|---|
| Media types supported | Small Form-Factor Pluggable (SFP) |
|---|
| Technical features | The Brocade 4Gb SAN Switch plugs into the back of the HP BladeSystem resulting in a consolidated solution for server connectivity to the SAN, Switch management is achieved through Brocade or HP StorageWorks B-series management and monitoring tools as well as providing an interface for other SAN management applications through SMTP or SMI, Time to deployment is drastically reduced as server interconnects are made once the Brocade 4Gb SAN Switch is plugged into the HP BladeSystem chassis. No need to route cables and plug in small form factor pluggable interconnects (SFPs), Fibre Channel cabling clutter is eliminated within the system rack since server connections are internal to the BladeSystem Chassis and SAN connections are made through the rear of the BladeSystem, The integration of Fibre Channel switching and server interconnects into the HP p-Class BladeSystem chassis lowers overall solution cost by reducing cabling and interconnect needs. Fibre Channel cabling clutter is eliminated within the system rack sin |
|---|
| Storage humidity | 5-95 % |
|---|
| Diagnostics | POST and embedded online/offline diagnostics |
|---|
| Service level | Class 2, Class 3, Class F (inter-switch frames) |
|---|
| Maximum port bandwidth | 4 Gbit/sec line speed, full duplex |
|---|
| Performance management | 10/100 Ethernet (RJ-45), serial port; WebTools, Advanced Zoning, ISL Trunking, Advanced Performance Monitoring, Fabric Watch, Extended Fabric, Fabric Manager, Secure Fabric OS |
|---|
| Relative humidity | 20-80 % |
|---|
| Supported network protocols | FC-FG Rev 3.5; FC-AL Rev. 4.5; FC-FLA Rev 2.7; FC-PLDA Rev 2.1; FC-PH-2 Rev 7.4; FC-GS-2 Rev 5.3; FC-PH-3 Rev 9.4; FC-SW Rev 3.3; FC-AL-2 Rev. 7.0; FC-PH Rev 4.3 |
|---|