HP CH956A#B19
DESIGNJET L25500 60 PLOT 1200DPI 60 INCH ENET IN
| Identificador: | 54262 |
|---|---|
| Marca: | HP |
| P/N: | CH956A#B19 |
| EAN: | 884962402788 |
| Disponibilidad: | |
| Stock: | No Disponible |
HP Designjet L25500 60-in Printer
DESIGNJET L25500 60 PLOT 1200DPI 60 INCH ENET IN
Overview
Increase business opportunities with a printer that delivers unrivaled versatility with a wide range of outdoor and indoor applications. Experience easy, reliable HP Designjet printing and attract the attention of environmentally-conscious customers.
Features
Meet many needs with one device, offering unrivaled versatility for outdoor/indoor applications1.
⁍ Produce outdoor signage such as billboards, bus shelters and vehicle wraps, with durability comparable to eco-solvent inks2.
Experience easy, unattended, low maintenance printing with proven HP Thermal Inkjet Technology.
⁍ Enjoy easy printing with proven HP Thermal Inkjet Technology, water-based HP Latex Inks and Original HP printheads which enable automatic maintenance and unattended printing.
Print with the environment in mind and create an improved working environment for your employees.
⁍ Water-based HP Latex Inks do not require hazard warning labels, are non-flammable, non-combustible3 and no special ventilation is required4.
1 The HP Designjet L25500 Printer produces an extremely broad range of both outdoor and indoor applications from a single device, which surpasses the number of different applications that traditional eco-solvent printers or water-based printers can produce.
2 HP image permanence and scratch, smudge, and water resistance estimates by HP Image Permanence Lab. Outdoor display permanence tested according to SAE J2527 using HP Latex and eco-solvent ink on a range of media, including HP media; in a vertical display orientation in simulated nominal outdoor display conditions for select high and low climates, including exposure to direct sunlight and water; performance may vary as environmental conditions change. Scratch, smudge, and water resistance tested using HP Latex and eco-solvent inks on a wide range of media, including HP media; water resistance is comparable when printed on water-resistant substrates. Laminated display permanence using GBC clear gloss 1.7 mil hot laminate. Results may vary based on specific media performance and scratch testing methodology. For more information, see www.hp.com/go/supplies/printpermanence
3 HP water-based Latex Inks are not classified as flammable or combustible liquids under the USDOT or international transportation regulations. These materials have been tested per the Pensky-Martins Closed Cup method and the flash point is greater than 110 deg C.
4 Special ventilation is not required to meet US OSHA requirements on occupational exposure to VOCs from HP Latex Inks. Special ventilation equipment installation is at the discretion of the customer—no specific HP recommendation is intended. Typically no air discharge permitting required with HP Latex Inks. Customers should consult countryand local requirements and regulations.
| Warranty: One-year limited hardware warranty. Warranty and support options vary by product, country and local legal requirements. |
| Productos relacionados | Ver |
|---|
| Referencia | HP CH956A#B19 |
|---|---|
| الوان الطباعة | Cyan, magenta, yellow, black, light cyan, light magenta |
| دعم أنواع الوسائط | Banners, vinyls, films, fabrics, papers, mesh with liner |
| الحد الاقصى لعرض الوسائط | 1524 mm |
| سمك الوسائط | > 0.02 in > 0.5 mm |
| عدد خراطيش الطباعة | 6 (1 each cyan, magenta, yellow, black, light cyan, light magenta) |
| تقنية الطباعة | Inkjet |
| حجم خرطوشة الطباعة (متري) | 775 ml |
| رأس الطابعة | 6 (2 x yellow/black, 2 x cyan/light cyan, 2 x light magenta/magenta) |
| الحد الاقصى لطول اللفة | No physical limit (determined by RIP software or media roll length); recommended up to 30 m No physical limit (determined by RIP software or media roll length); recommended up to 100 ft |
| الوصلة | Gigabit Ethernet (1000Base-T) |
| الأبعاد | 1524 mm |
| أبعاد الحزمة (العرض x العمق x الطول) | 269 x 81 x 118.4 cm (105.9 x 31.9 x 46.6 ") |
| سرعة الطباعة | 22.8 m²/h (4-pass bidirectional), 16.5 m²/h (6-pass bidirectional), 10.6 m²/h (8-pass bidirectional), 9 m²/h (10-pass bidirectional), 7.6 m²/h (12-pass bidirectional), 6.3 m²/h (16-pass bidirectional) |
| حجم | 246.4 x 69.8 x 137.2 152.4 cm (97 x 27.5 x 54 60 ") |
| الشبكة جاهزة | ✓ |
| الابعاد العرض x العمق x الارتفاع | 2465 x 690 x 1370 mm |
| الوزن | 181 kg |
| جودة الطباعة (ملون, جودة عالية) | < 1200 x 1200 DPI |
| انزال الحبر | 12 pl |
| جودة الطباعة (أسود, أعلى جودة) | 1200x1200 DPI |
| الحد الاقصى لطول الطباعة | No physical limit (determined by RIP software or media length); recommended > 30 m |
| احجام الوسائط حسب الطلب | 58 to 152.4 cm rolls |
| معالجة الوسائط | Roll feed, take-up reel, automatic cutter for vinyl, paper-based media, backlit polyester film and thin banners |
| المعالجة للورق القياسية المدخل | Roll feed |
| المعالجة للورق القياسية المخرج | Take-up reel |
| فتحات رؤوس الطابعة | 2112 |
| عدد السخانات المدمجة | 2 |
| لوحة التحكم | Illuminated, graphical LCD display area; 8 front-panel buttons (Back, Cancel, Down arrow, Form Feed and Cut, Power, Reset, Select, Up arrow); 2 LEDs (Power, Status); On/Off buzzer |
| الحد الاقصى لوزن اللفة | 40 kg |
| لقطر اللفة الخارجية | 180 mm |
| الحد الأقصى لسرعة الطباعة (متري) | 22.8 m²/h (4-pass bidirectional), 15.4 m²/h (4-pass unidirectional), 16.5 m²/h (6-pass bidirectional), 10.3 m²/h (6-pass unidirectional), 10.6 m²/h (8-pass bidirectional), 7.9 m²/h (8-pass unidirectional), 9 m²/h (10-pass bidirectional), 6.3 m²/h (10-pass unidirectional), 7.6 m²/h (12-pass bidirectional), 5.1 m²/h (12-pass unidirectional), 6.3 m²/h (16-pass bidirectional), 3.9 m²/h (16-pass unidirectional), 3.4 m²/h (18-pass unidirectional) |
| استهلاك الطاقة (وضعية الاستعداد) | 0.4 W |
| وظائف | |
| مواقع السخانات المدمجة | Printing area; output area |
| درجة حرارة السخان | 40 - 60 (drying module); 60 - 120 (curing module) |
| قوة الانبعاثات الصوتية (وضعية الاستعداد) | 5.1 B(A) |
| خطوات التثبيت | Professional installation is recommended |
| الحد الأقصى لطول الطباعة (ملكي) | No physical limit (determined by RIP software or media roll length); recommended up to 100 ft |
| مقياس أحجام الوسائط (لفات ملكية) | 23 to 60-in rolls |
| سمك الوسائط (حسب ممر الورق) | Up to 19.7 mil |
| الحد الأقصى لعرض الوسائط (ملكي) | 152.4 cm (60 ") |
| المساحة غير القابلة للطباعة للفة الوسائط(ملكي) | 0.2 x 0.2 x 0.2 x 0.2 in |
| وزن الحزمة | 309.3 kg (682 lb) |
| طباعة الهامش لللفَات | 5 x 5 x 5 x 5 mm |
| سرعة الطباعة (ملكي) | 246 ft²/h (4-pass bidirectional), 178 ft²/h (6-pass bidirectional), 114 ft²/h (8-pass bidirectional), 97 ft²/h (10-pass bidirectional), 81 ft²/h (12-pass bidirectional), 68 ft²/h (16-pass bidirectional) |
| الحد الاقصى لمدخلات اللفة | 1 |
| ضغط الانبعاثات الصوتية (وضعية الاستعداد) | 39 dB(A) |
| اعداد درجة حرارة المسخن | 104 - 140 (drying module); 140 - 248 (curing module) |
| ارتفاع رأس الطابعة (ملكي) | 0.075 in |
| الحد الأقصى لسرعة الطباعة (ملكي) | 246 ft²/hr |
| الحد الأقصى لسرعة الطباعة (ملكي) | Maximum rate of output for color image 100% color coverage (Bandes file) maximum roll size, quality 4-pass bidirectional print mode |
| الحد الأقصى لسرعة الطباعة (متري) | Maximum rate of output for color image 100% color coverage (Bandes file) maximum roll size, quality 4-pass bidirectional print mode |
| تدفق الهواء | No special ventilation required as per OSHA standards |
| مصدر البيانات الورقية | ICEcat.biz |
| انبعاثات الطاقة الصوتية | 7.5 B(A), 5.1 B(A) (standby) |
| ضغط الانبعاثات الصوتية | 56 dB(A), 39 dB(A) (standby) |
| معدات الطاقة | Input voltage (auto ranging) 220 to 240 VAC (-10% +6%), 50/60 Hz (+/- 3 Hz), 15 A max per power cord |
| مصدق من "انيرجي ستار" | ✓ |
| استهلاك الطاقة (وضعية الاستعداد) | 2.6 kW |
| استهلاك الطاقة | 4.8 kW maximum (only when warming up) |
| استهلاك الطاقة (وضعية توفير الطاقة) | < 72 watts |
| مدى رطوبة التشغيل الموصى بها | 20 to 80% RH (non-condensing) |
| مدى درجة حرارة التخزين (من - الى) | -25 - 55 °C |
| مدى درجة حرارة التشغيل الموصى بها (من - الى) | 18 - 25 °C |
| مدى الرطوبة النسبية للتشغل | 20-80 % |
| مدى درجة حرارة التشغيل (من- الى) | 15 - 30 °C |
| مدى الرطبة النسبية للتخزين | 20 to 90% RH (non-condensing) |
| أنواع الحبر المتوافقة والوازم | HP Latex Inks |
| التوافق الكهرومغناطيسي | Compliant with Class A requirements, EU (EMC Directive) |
| الامان | EU (LVD and EN 60950-1 compliant); Russia (GOST) |
| شهادة | Energy Star; WEEE; EU RoHS; REACH; EuP; FEMP |
| ارتفاع رأس الطابعة | 1.9 mm |
| Su opinión | Añadir opinión |
|---|---|
| Valoración | ☆☆☆☆☆ (Sin valoración) |
| Opiniones y comentarios, HP CH956A#B19 | product |